Tcllib package indexing ======================= This document describes the possibilities for using one or more pkgIndex.tcl files in an installation of tcllib to provide the information about all of its packages to a tcl interpreter, discusses their pro and contra and makes a choice for Tcllib 1.4. A roadmap of changes in the future is made available as appendix. Background under which to see the solutions: There are three level of groupings: - The tcllib project itself - Modules in the project (== subdirectory of 'modules') - Packages in a module. Each module currently contains one package index file. Some modules contain more than one package. They share the index. Most packages require specific versions of the Tcl interpreter. They perform the checks in their package index file and do not register if the pre-requisites are not fulfilled. Other checks are possible, but currently not in use. Note I: Whether a solutions is actually applicable depends on external factors, like the chosen directory layout of an installed tcllib. Note II: All solutions currently depend on the specific implementation of [tclPkgUnknown] coming with the basic core, simply by the fact that the files looked at are called 'pkgIndex.tcl'. This is therefore no contra argument against any specific solution, but against all. We ignore this as currently there is no better replacement in existence. Note III: We have to support Tcl before 8.3. as some packages in tcllib allow this. [i1/ng] No global package index ------------------------------- In this solution the module package indices are the only index files present in an installation. This solution is applicable if and only if one of the flat directory layouts (L2/Fa or L2/Fb) has been chosen. Pro: Simple. No need for complex management. [i2/ad] Global package index, auto_path extension, direct --------------------------------------------------------- A single global package index is present in the toplevel directory of the installation. This solution is applicable if and only if the deep directory layout (L2/D) has been chosen. The package index contains a series of statements extending the auto_path variable with all module directories. The list of names of the module directories is hardcoded. In other words, it is _not_ determined via [glob]. Example: lappend auto_path [file join $dir md4] lappend auto_path [file join $dir md5] lappend auto_path [file join $dir sha1] ... Pro: [[0]] Compared to [i3/ag] this should be bit faster as glob'ing the directory tree of tcllib is avoided. This performance-boost is not a big pro according to the opinions below. [[1]] Relies on the module package index files for the actual registration of packages, thus automatically inherits the correct contraints on the registration of packages. No additional complexities. [[2]] Easier to generate than [i6/dr]. Contra: [[3]] Hard coding the directory names implies that adding modules to the installed tcllib is not as easy as just creating a new directory for the module/package. The global index has to be updated too. Contra-Contra: <> <> [[4]] Extending the 'auto_path' list causes the package management of the tcl core to re-read the list and glob through all of them for new package indices. This has a high cost in terms of filesystem access, i.e. is an issue of performance. Contra-Contra: <> <> [[5]] This enables auto-loading in each module (according to any tclIndex file installed). This should not be done by the package indexer, but by the package itself. See control for an example. [[10]] Will not work with Tcl releases prior to 8.3.1. Only then was [tclPkgUnknown] "enhanced" to deal with changing ::auto_path values. If tcllib 1.4 wishes to continue supporting pre-8.3.1 Tcl, then this option has to be supplemented with a fallback. [i3/ag] Global package index, auto_path extension, glob ------------------------------------------------------- This is like [i2/ad], except that the list of sub directories is not hardcoded into the index, but determined through glob. Example: foreach subdir [glob -nocomplain -type d $dir/*] { lappend auto_path $subdir } Pro: Anti-[[3]] [[1]] Contra: All the contras of [i2/ad] and Anti-[[0]]. [i4/sd] Global package index, sourcing module indices, direct ------------------------------------------------------------- A single global package index is present in the toplevel directory of the installation. This solution is applicable if and only if the deep directory layout (L2/D) has been chosen. The package index contains a series of statements source'ing the package index files of the modules in tcllib. The list of names of the module directories is hardcoded. In other words, it is _not_ determined via [glob]. Example: set main $dir set dir [file join $main md4] ; source [file join $dir pkgIndex.tcl] set dir [file join $main md5] ; source [file join $dir pkgIndex.tcl] set dir [file join $main sha1] ; source [file join $dir pkgIndex.tcl] ... Pro: [[0]], but compared to [i5/sg]. [[1]] [[2]] [[6]] In contrast to [i2/ad] and [i3/ag] repeated glob'bing for package index files is avoided. This cuts down on costly FS accesses. I.e. another perf. boost. Contra: [[3]] [i5/sg] Global package index, sourcing module indices, glob ----------------------------------------------------------- This is like [i4/sd], except that the list of package indices to source is not hardcoded into the index, but determined through glob. Example: foreach subdir [glob -nocomplain -type d $dir/*] { set dir $subdir source [file join $dir pkgIndex.tcl] } Pro: Anti-[[3]] [[1]] [[2]] Contra: All the contras of [i2/sd], and Anti-[[0]] [i6/dr] Global package index, direct registration ------------------------------------------------- A single global package index is present in the toplevel directory of the installation. This solution is applicable if and only if the deep directory layout (L2/D) has been chosen. The package index contains a series of statements which directly register all the tcllib packages. Example: if {[constraint]} {return} package ifneeded md4 [list source [file join $dir md4 md4.tcl]] package ifneeded md5 [list source [file join $dir md4 md4.tcl]] package ifneeded sha1 [list source [file join $dir md4 md4.tcl]] ... more constraints ... package ifneeded Pro: [[7]] This is the fasted solution as the number of accesses to the filesystem is minimal. Contra: [[[3]] Anti-[[1]] Care has to be taken to ensure that the constraints the module indices place on the registration of packages are replicated in the global index. All other solutions simply used the module indices and thus got it right automatically. Now supporting code is required to detect such constraints and then to properly recreate them globally. = High complexity for the maintainer. [i7/ad] Global package index, auto_path extension, direct --------------------------------------------------------- A single global package index is present in the toplevel directory of the installation. This solution is applicable if and only if the deep directory layout (L2/D) has been chosen. The package index contains a single statement extending the auto_path variable with the tcllib main directory. The standard package management will then find all module sub directories and the package indices in them. Example: lappend auto_path $dir Pro: [[1]] [[8]] This is the easiest solution by far in terms of code to write, and complexities to solve (none). [[9]] <> <> Contra: [[4]] [[10]] [i8/pm] Global package index, pkg_mkIndex ----------------------------------------- Just use [pkg_mkIndex modules */*.tcl] to generate the master index. Pro: Easy to do. Contra: Does not handle constraints in subordinate package indices, simply because they are actually ignored during processing. Adding code to handle constraints evolves this into [i6/dr]. Note: The contra is hard enough IMHO to make this solution not applicable for 1.4, which does have constraints, and handling them wrong (not at all) is a bug. General discussion ------------------ Given that a deep directory layout was chosen [i1/ng] is not applicable and therefore dropped from the discussion. In the pro and contra arguments listed above three independent axes of reasoning emerged: a) Performance of the solution, with the number of accesses to filesystem the main factor determining it. b) Complexity/difficulty of the solution with regard to adding/updating packages. c) Complexity of generating the master index. Axis (b) has essentially been thrown out. Trying to modify the installation of tcllib itself is bad practice. Install new/updated packages separately. The version numbering takes care of the rest, i.e. usage of the new over the older version found in tcllib. With respect to axis (c), complexity of generation, [i7/ad] is the definite winner, with the other *d solutions close behind (all use fixed scripts, I7/ad wins on size). This is followed by the *g solutions as they require actual dynamic generation of code. And at the bottom of the ladder is [i6/dr] with its need for close inspection of the sub-ordinate indices to get everything right. Now axis (a), performance, [i6/dr] is most likely the winner as it causes only one index to be read and nothing else. This is followed by the all *d solutions, they read the subordinate indices, but do not need much globbing. The actual order in this group is difficult to determine. I guess that the auto_path extending methods are slower than the sourcing methods, and the adding of one directory faster than the adding of all, as the latter looks for much more subdirectories. The next group oare the *g solutions as they their own globbing too beyond that done by the package mgmt. Two final rankings (c), then (a) (a), then (c) ------------- ------------- [i7/ad] [i6/dr] [i4/sd] [i4/sd] [i2/ad] [i7/ad] [i5/sg] [i2/ad] [i3/ag] [i5/sg] [i6/dr] [i3/ag] ------------- ------------- [i4/sd] seems to be a good compromise solution between performance and complexity of generation, but [i7/ad] is not too bad either. [i4/sd] reminder: set main $dir set dir [file join $main md4] ; source [file join $dir pkgIndex.tcl] set dir [file join $main md5] ; source [file join $dir pkgIndex.tcl] set dir [file join $main sha1] ; source [file join $dir pkgIndex.tcl] ... [i7/ad] reminder: lappend auto_path $dir Other opinions: Don Porter prefers [i7/ad], and [i6/dr] as second choice. Also as [i7/ad] fallback for older Tcl before 8.3.1 Joe English strictly opposes any solution modifying the auto_path, violoating his opinion that index scripts should have no side-effects beyond registering a package. Chosen solution for Tcllib 1.4 ------------------------------ After comparing the code for the combination of [i7/ad] and [i6/dr] as submitted by Don Porter, and for [i4/sd] as submitted by myself (Andreas), and a small discussion on the Tcl'ers chat between Don and me we took [i4/sd] for the main body of the idnex, and the header of Don's code. Basically the chosen package index is a combination of [i7/id] and of [i4/sd] as fallback. This is still as easy to generate as [4/sd], the index is also only a bit more complex, and speed should be ok too. Don convinced me that while extending auto_path is definitely bad in the long-term it is still ok for the short-term and release 1.4. Roadmap ------- After Tcllib has been driven into the state of one package per module directory, and switched to a flat directory layout for its installation we switch to [i1/ng] for the indexing structure. ----------------------------------- This document is in the public domain. Andreas Kupries